MEDIA VISION TECHNOLOGY, INC.

CDPC-AT INTERFACE CARD (650-0024-05)

Card Type              CR-ROM Interface card
Chip Set               Unidentified
Maximum Onboard Memory Unidentified
I/O Options            Interface connector
Data Bus               16-bit ISA

[Image]

          CONNECTIONS

       Function          Label

  Interface connector     CN1

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »   DMA sharing - disabled                     J11         Pins 2 & 3
                                                              closed

      DMA sharing - enabled                      J11         Pins 1 & 2
                                                              closed

                          PORT ADDRESS SELECTION

       Setting              J10/A            J10/B             J10/C

  »        220              Open              Open            Closed

           230              Open             Closed            Open

           240             Closed             Open             Open

                            BOARD ID SELECTION

            Note: Closing J2/pins 5 & 6 forces the board base I/O address
            to 388h. When using the other jumper settings, the software
            scans for an available base I/O address. Refer to the
            manufacturer’s documentation for possible ID and base I/O
            settings.

                            INTERRUPT SELECTION

     Setting         J13/A         J13/B          J13/C         J13/D

         IRQ2         Open          Open          Open          Closed

         IRQ3         Open          Open         Closed          Open

  »      IRQ5         Open         Closed         Open           Open

         IRQ7        Closed         Open          Open           Open

                     MISCELLANEOUS TECHNICAL NOTES

  Note: Termination Power and termination settings are unidentified.